METZ KLT 2-lane continuous industrial washing system 600 pcs/h

System for crates, inserts, KLTs and lids. Cleaning of dust, mineral grease, mineral oil and metal chips. Optimized for cleaning thermoforming sheets (tray and lid).

Manufacturer: Walther Metz cleaning systems Frankenthal
Year of construction: 2021
Operating hours: 9,446 h
Dimensions: 12350 x 1950 x 2800 mm
Items to be cleaned: 300 pieces/h per lane
Passage width maximum 300 mm
Maximum throughput height: 650 mm
Material of the system: Stainless steel

Tracks: 2-track chain conveyor machine
Construction: modular (expansion possible at any time)
Hot water heating: Heat exchanger in wash basin for heating circuit
Flow temperature: recommended 90°C
Nozzle pipes: Screwed
Oil separator: Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks
Wash material counter: on both lanes

The system consists of the following modules:

  • Infeed module (length 1.2 m) with clamping and deflection shaft of the machine’s internal conveyor system. Also serves as infeed table.
  • Wash module 1 (length 2.15 m) with tank and bag filter and CN low-pressure centrifugal pump 7.5 kW. The dirt is efficiently washed off using a high water volume and low pressure (3-5 bar). Pre-cleaning takes place here.
  • Washing module 2 (length 2.15 m) with tank and bag filter and CN low-pressure centrifugal pump 7.5 kW. A high water volume and low pressure are used to efficiently wash off the items to be cleaned.
  • Cold air blow-off (length 1.25 m) with cold air blower 5.5 kW
  • Hot air blow-off 1 (length 2.15 m) with 2 x 7.5 kW blowers and 2 13.5 kW heating registers. Cleaning material is blown off via fan nozzle system (T adjustable up to 80°C).
  • Hot air blow-off 2 (length 2.15 m) with 2 x 7.5 KW fans and 2 13.5 kW heating registers. The items to be cleaned are blown off via a fan nozzle system (T adjustable up to 80°C).
  • Discharge module (length 1.25 m) with drive for the machine’s internal conveyor system 0.55 kW, the speed of which can be continuously adjusted at any time via a frequency converter. The parts are conveyed through the machine using a chain system. 2 tracks, 1 chain / track and a drive motor for both tracks.

Including: Heating, chamfering extractor, control cabinet, sedimentation tank for all wash tanks, side guide machine, cascades, bag filter, ball valve for waste water, water vapor extraction system

Further information on request

Location: Hamburg

 

Your inquiry